Sicobloc Sheets

Sales conditions

 Valid from January 1st, 2016

Nominal Sizes	630 x 1450mm
Dimensions Tolerances	W: +/-5mm; L: +/-5mm
Standard Thickness	0,2mm
Thickness Tolerances	+/- 10% (in Attachment I)
Standard Finish	RR

 

Glossy and Matte Finish

Nominal Sizes	620 x 1430mm
Dimensions Tolerances	W: +/-10mm; L: +/-10mm
Standard Thickness	0,2mm
Thickness Tolerances	+/- 10% (in Attachment I)
Standard Finish	LM (glossy/matte), MM (matte/matte)

 

Laminated

Nominal Sizes	620 x 1430mm
Dimensions Tolerances	W: +/-10mm; L: +/-10mm
Standard Thickness	0,3mm
Thickness Tolerances	+/- 10% (in Attachment I)
Standard Finish	LM (glossy/matte), MM (matte/matte)

 

 

Attachment I

Thickness Tolerance

Nominal Thickness (mm)	Minimum (mm)	Maximum (mm)
0,2	0,18	0,22
0,3	0,27	0,33
0,4	0,36	0,4
0,5	0,45	0,55
1,0	0,9	1,10
20	1,80	220

 

Characteristics of the film (not laminated)

Characteristics	Analysis Method		Unit of Measurement	Value
Density	DIN EN ISO 1183		gr/cm3	1,27
Water Absorption	Internal method	50°C for 24hrs	%	0,22
Hardness	DIN ISO 868	Shore A		85-88
Tensile Strength	ISO 527 (speed 50mm/min		N/mm	10-30
Elongation at Break	ISO527 (speed 50mm/min		%	90-130

Chemical Resistance

20°C

Tested Substance	Temp Test 20°C	Temp Test 50°C
Water	R	R
Sea Water	R	R
Acetic Acid 10%	R	-
Citric Acid	R	-
Phosphoric Acid 30%	R	R
Hydrochloric Acid 20%	R	P
Nitric Acid 5%	R	R
Sulphuric Acid 5%	R	R
Ammonia	P	-
Sodium Bicarbonate	R	-
Sodium Chloride	R	R
Ammonium Chloride	R	R
Hydrogen Peroxide	R	-
Glycerine	R	-
Methylene Chloride	N	N
Sodium Hypochloride 15%	R	P
Methanol	P	-
Ethanol	R	-
Isopropanol	R	-
Acetone	N	N
Vinegar	R	-
Beer	R	-
Casein	R	R
Glucose	R	R

LEGEND
R Resits
P Partially Resists
N No Resistance

Sicobloc

Product Information

 

 1. Identification of the article and the company

A. Identification of the article
Commercial name: Sicobloc
Chemical name: Polyvinylchloride

 2. Identification of risks

Under normal conditions of use, the product is considered non-hazardous.

 3. Composition and information on the components

3.1 Chemical nature
Plasticized PVC
3.2 Main components
PVC Cas n. 90002-86-2
1,4-Benzenedicarboxylic acid bis(2ethylhexyl) ester Cas n. 6422-86-2
Coloring agents (depending on pattern)

 4. First aid measures

4.1 Skin contact
Eye contact: edges and scraps of the film can cause damage to the eyeball, consult a doctor.
Skin contact: edges and scraps of the film can cause abrasions, wash and disinfect the injury and consult a doctor if necessary.
The contact at temperatures higher than the melting point can cause burns, consult a doctor. Under normal conditions of use, the product is considered non-hazardous.

 5. Fire safety methods

5.1 Suitable extinguishing media:
CO2 - foam and extinguishing powders, waterspray and waterjet
5.2 Unsuitable extinguishing media:
Not known
5.3 Risks due to the development of dangerous substances
Gas produced by the combustion process may contain substances dangerous both for health and safety such as CO, CO2, hydrochloric acid.

5.4 Protective equipment for fire-fighters
The use of suitable breathing apparatus is compulsory.
Masks type B2 / E2 / P3 according to UNI EN 141, EN 143, EN 148-1

5.5 Procedures to hold fire back
In the event of fire, remove the stored material from the area at risk only in case this procedure can be effected safely.
Avoid inhaling combustion fumes.
Keep windward and avoid to stop in underground areas.

 6. Measures in the event of accidental leaks

Accidental and predictable leaks are:

• Decomposition fumes if item is subject to high temperatures. Fumes extraction systems and effective ventilation of the premises must be provided for. Avoid breathing fumes, and in case use suitable breathing apparatus.
  

For further information concerning exposure control and individual protection please see sections 8 and 13.

 7. Handling and Storage

7.1 Handling
In case of heat treatment of the film provide aspiration of the fumes and suitable ventilation.
Do not eat, drink and smoke while handling.

7.2 Storage
Keep in a cool, dry place
Avoid direct exposure to sunlight; keep the item in its original packaging, avoid the presence of open flames.
Adopt normal fire prevention measures.
Material that can be used for storage: carbon boxes, paper, polyethylene HD (PEHD), poly ethylene LD (PELD).

7.3 Use
Before the use, condition the material at a temperature ≥ 20°C for at least 48h.
Prepare points for grounding discharge of static electricity.

 8. Exposure control and individual protection 

8.1 Individual protective equipments

During working of material:
In case of contact with material during working stages at high temperature wear gloves suitable against thermic risks.
Respiratory tract protection: use mask with filter in case of fumes and dust.
Wear protective clothing, safety shoes, gloves, safety eye-glasses. Follow safety rules.

 9. Chemical and Physical properties

• Appearance
  
• Physical state: solid
  
• Form: 0,2mm film
  
• Color: depending on pattern
  
• Odor: characteristic
  
• Specific Weight: 1.27 g/cm3
  
• Solubility in water: insoluble

10. Stability and reactivity

10.1 Stability
The material is stable in the recommended handling and storing conditions. If subject to high temperatures it may generate dangerous decomposition products.
10.2 Substances to be avoided
Avoid contact with ketones and esters
     a. Products from decomposition
If subject to high temperatures it may generate decomposition products, dangerous to health and safety.
In case of fire, the product can generate dangerous gases like CO (carbon monoxide) CO2 (carbon dioxide) and hydrochloric acid.

11. Toxicology Information

Ventilation is recommended in transforming and welding processes.
Basic standards of industrial hygiene must be complied with.

12. Ecological Information

Use the product and dispose of wastes according to good practice procedures and do not abandon the product in the environment.

13. Waste disposal

Collect working wastes (pieces, dusts, scraps, etc.) in clean containers.
If possible, recycle production wastes, or otherwise dispose of them as industrial wastes according to the relevant regulations.
Contact an authorized operator for the disposal of industrial wastes.
Avoid dispersing wastes in drainage systems and in groundwater or in rivers.
Do not abandon wastes in the environment.

14. Transport

The product is not subject to specific regulation.
Avoid exposing the product to direct sunlight, open flames or heat sources > 60 ° C for an extended time.

15. Information on regulation

The product Sicobloc is identified as “article” according to Regulation (CE) n. 1907/2008 e smi.

16. Other information

The information contained in this data sheet is based on the knowledge available to us when it was prepared.
The product characteristics are set out here for the purposes of safety precautions and emergency procedures and should not be taken as a guarantee of specific properties.
The evaluation of the product in relation to specific processing and principal end use is highly recommended.